Microencapsulated Self-activating Fire Extinguishing Gel Coating | Sheet Material | With Power Cord Cables Deepmaterial is self contained fire suppression material manufacturer in china,has developed different forms of self-excited perfluorohexanone fire-extinguishing materials to target the spread of thermal runaway and deflagration control in new energy batteries, including sheets, coatings, potting glue and other excitation fire-extinguishing […]

This product is a one component heat curing epoxy with good adhesion to a wide range of materials. A classic underfill adhesive with ultra-low viscosity suitable for most underfill applications. The reusable epoxy primer is designed for CSP and BGA applications.

Product Category: Conductive Silver Adhesive

Conductive silver glue products cured with high conductivity, thermal conductivity, high temperature resistance and other high reliability performance. The product is suitable for high-speed dispensing, dispensing good conformability, glue point does not deform, not collapse, not spread; cured material moisture, heat, high and low temperature resistance. 80 ℃ low temperature fast curing, good electrical conductivity and thermal conductivity.

Acrylic glue non-flowing, UV wet dual-cure encapsulation suitable for local circuit board protection. This product is fluorescent under UV(Black). Mainly used for local protection of WLCSP and BGA on circuit boards. Organic silicone is used to protect printed circuit boards and other sensitive electronic components. It is designed to provide environmental protection. The product is typically used from -53°C to 204°C.

This series is a one-component heat-curing epoxy resin for low temperature curing with good adhesion to a wide range of materials in a very short period of time. Typical applications include memory cards, CCD/CMOS program sets. Particularly suitable for thermosensitive components where low curing temperatures are required.

The product cures at room temperature to a transparent, low shrinkage adhesive layer with excellent impact resistance. When fully cured, the epoxy resin is resistant to most chemicals and solvents and has good dimensional stability over a wide temperature range.

The product is a one-component damp-cured reactive polyurethane hot-melt adhesive. Used after heating for a few minutes until molten, with good initial bond strength after cooling for a few minutes at room temperature. And moderate open time, and excellent elongation, fast assembly, and other advantages. Product moisture chemical reaction curing after 24 hours is 100% content solid, and irreversible.

The product has excellent weather resistance and has good adaptability to natural environment. Excellent electrical insulation performance, can avoid the reaction between components and lines, special water repellent, can prevent components from being affected by moisture and humidity, good heat dissipation ability, can reduce the temperature of electronic components working, and prolong the service life.

DeepMaterial optical glass UV adhesion reduction film offer low birefringence, high clarity, very good heat and humidity resistance, and a broad range of colors and thicknesses. We also offer anti-glare surfaces and conductive coatings for acrylic laminated filters.

The product is a high cleanliness anti-static protective film, the product mechanical properties and size stability, easy to tear off and tear up without leaving residual adhesive. It has good resistance to high temperature and exhaust. Suitable for material transfer, panel protection and other use scenarios.

Product Category: Screen Protector

Consumer electronics display/screen protectoer
· Abrasion-resistant
· Chemical-resistant
· Scratch-resistant
· UV-resistant

LED Scribing/Turning Crystal/Reprinting Semiconductor PVC Protective Film